THIS IS TEST SITE

PLEASE VISIT EVOQUA.COM FOR OUR LIVE WEBSITE.

Evoqua United States - Canada - EN

Modulab High Flow System Bio Model

Material: W2T196104 Unit of Measure #: EA See All Modulab Lab Systems

The MODULAB® High Flow water system is a modular, point-of-use polishing system which consistently provides high quality Type 1 water (up to 18.2 Mω cm @ 25 °C) with flow rates up to 14 lpm (3.7 gpm) of pretreated water. The MODULAB High Flow system is a wall- mountable unit that requires a minimal footprint for installation.

List Price
${{finalPrice | intlNumber('en-EN','USD')}}
  • 0 is the minimum order quantity for this product. Please check quantity and add to cart again.
-
+

Discontinued product
evoqa

The MODULAB® High Flow water system is a modular, point-of-use polishing system which consistently provides high quality Type 1 water (up to 18.2 Mω cm @ 25 °C) with flow rates up to 14 lpm (3.7 gpm) of pretreated water. The MODULAB High Flow system is a wall- mountable unit that requires a minimal footprint for installation.

List Price
${{finalPrice | intlNumber('en-EN','USD')}}
-
+
Discontinued product

Description

The MODULAB High Flow is delivered fully assembled and functionally tested. Cartridges will need to be purchased separately and should be installed after the system has been safely mounted. The system is offered in three configurations:

  1. a low TOC model
  2. a low bacteria model
  3. a low pyrogen model

Features

Legacy Material ID

MHF0SMF2

Product Features

  • High capacity, low TOC cartridges
  • Flow rates up to 14 lpm
  • Dual wavelength UV sterilization
  • Wall mountable
  • Up to 18.2 Megohm-cm water
  • Choice of cartridge to fit your application
  • Easy Sanitization

Technical Data

  • Minimum Flow Rate: 2 lpm (0.5 gpm)
  • Maximum Flow Rate: 14 lpm (3.7 gpm)
  • Product Water Resistivity: Up to 18.2 Megω-cm @ 25 °C
  • Total Organic Carbon (TOC): < 15 ppb *
  • Heavy Metals: < 0.01 ppb
  • Bacteria: < 10 cfu/ml **
  • Endotoxin: < 0.05 EU/ml ***

With Organic Removal Cartridge installed and RO (reverse osmosis) feed water.

** With Sub-micron filter installed as specified.

*** With UF (ultrafiltration) Filter Cartridge installed as specified. Note: Specifications are based on a RO feed.

General Specifications

  • Minimum Feed Pressure: 25 psig
  • Maximum Feed Pressure: 60 psig
  • Minimum Feed Temperature: 41 °F (5 °C)
  • Maximum Feed Temperature: 86 °F (30 °C)  

Physical Specifications

  • Length: 43" (109 cm)
  • Depth: 8.5" (22 cm)
  • Height: 39" (100 cm)*
  • UV Bulb Service Clearance: 6" (16 cm)
  • Front *Requires an additional 4" in height to allow changing of cartridges

Electrical Requirements

  • Low voltage service, single phase, 120VAC
  • 15 AMP breaker required by code
  • Feed Water Requirement
  • RO or DI feed water required

Documentation